AR-Mask AR15 Paint Masking Kit

Stop wasting your time with tape.

Quickly mask your AR15 receivers prior to spraying them with your favorite coating.

AR15 specific cavity plugs

Cut to exacting tolerances for a perfect fit. Conical plugs can be trimmed to your desired length.

Withstands extreme heat

Produced from high-temp silicone, making it ideal for Cerakote™, GUN-KOTE™, or other bake on firearm finishes.

Use it over and over again

All components are reusable, even after baking.

Made in the USA

Designed and manufactured by IC13 in the USA.

The AR-MASK™ masking kit is the simplest and quickest solution to masking your AR15 upper and lower receivers for painting. Just push the plugs into the correct cavities and you are ready to paint in minutes, not hours, all while protecting critical areas from overspray. Plugs are made from high temperature silicone, making them perfect for Cerakote™, GUN-KOTE™, or other bake on firearm finishes. Can be reused over and over again. A kit includes components for one upper and one lower AR15 receiver.

• Cavity plugs are cut to exacting tolerances for the perfect fit
• Conical plugs can easily be cut to your desired length
• Withstands extreme heat
• Inexpensive and REUSABLE
• Saves TONS of time
• MADE IN THE USA

*Cerakote™ is a trademark of NIC Industries *GUN-KOTE™ is a trademark of Brownell’s, Inc *AR15 receivers pictured are not included. IC13 recommends using tape on the upper receiver’s barrel nut threads.